Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED

   Home   |   Product   |   Forced Convection Drying Oven

Heating & Drying Oven

  • Forced Convection Drying Oven
Forced Convection Drying Oven

Forced Convection Drying Oven

  • Model: CS101-EBC
  • Temperature control mode: PID control
  • Temperature display mode: Measure and set temperature LED digital display
  • Temperature sensor: Industrial platinum resistor (PT100)
  • Product description: Forced Convection Drying Oven
  • INQUIRY

Purpose:

This Forced Convection Drying Oven is suitable for the production enterprises such as electronics, electric, instrument, material, semi-conductor etc. to dry, bake and carry out heat treatment tests on the non-combustible, non-explosive goods; for the scientific research of the units including schools, medication, foods and chemical industry etc. as well as drying, baking, sterilizing, heat preserving and carrying out heat treatment tests on the non-combustible, non-explosive goods; especially suitable for the drying and aging during the production process of LED, LCD, quartz crystal, capacitor and resistor etc. which require high constant temperature precision and reliability.

The CS101 series forced air convection drying oven adopts the methods such as forced blast, reasonable allocation of high performance heating components and scientific distribution of hot air convection holes, which make the temperature in the oven as even as possible. When it is in the best conditions, the evenness of each point in the available space in the oven can be as high as ±1℃, which can compare with the drying ovens made in Japan, Taiwan and Germany etc.

The CS101 series is a product of new generation; it adopts the latest digital display instrument for temperature measurement, so the temperature control is easy, accurate, clear and obvious.

 

Structure:

The drying oven is made of thin steel sheets; fiberglass is inserted between the working chamber and outer plate of the oven as thermal insulation. There is a glass window in the center of the door for observing the working chamber. The instrument adopts high performance heater which heats from the top and both sides, then the heat will be forced to convect by fan(s). All the electric devices are installed in the upper part of the oven. The electric heater is installed on the interior working chamber of the oven, and it is divided into two sets, namely “Low temperature” and “High temperature”, and there is an indicator light indicating the heating. It means that the electric heater is working when the light is lit, and the heating is stopped when the light is off.

 

Technical parameters:

Name

Forced Convection Drying Oven

Type

CS101-1EBC

CS101-2EBC

CS101-3EBC

CS101-4EBC

CS101-5EBC

CS101-6EBC

CS101-7EBC

Circulation mode

Forced convection type

Working dimensions

350*450*450

450*550*550

500*600*750

800*800*1000

1000*1000*1000

1000*1200*1200

1000*1200*1500

Power

1500W

2000W

2500W

4500W

12KW---30KW

Working voltage

220V 50HZ

380V 50HZ

Temperature range

R.T+10300

Temperature fluctuation

≤± 0.5

Temperature evenness

≤± 1%

≤± 2.5%

Time of temperature rise

≤ 80min

Depends on the power

Temperature control mode

PID control

Temperature setting method

Press  and  to set the number

Temperature display mode

Measure and set temperature LED digital display

Temperature sensor

Industrial platinum resistor (PT100)

Material of inner

Environment-friendly galvanized inner

Cold rolled plate

Material of outer plate

European standard, plastic sprayed surface

Antirust treatment, paint sprayed

Number of partition layer

Two layers, distance adjustable

Three layers

Observation window

Square high temperature resistance tempered glass

Round high temperature resistance tempered glass

Air vent

At back

On top

At back

Heater

Stainless steel high quality tube-type heater

PRODUCT CATEGORIES

LATEST NEWS